Description: Sideways adjustment motor (M2) abnormality MJ-1109/1110 (When MJ-6105 is installed) * You receive a [CC51] error when the [ED11] error occurs three times in succession or occurs during the initialization.
Causes: Sideways adjustment motor (M2) Sideways deviation home position sensor (S3) Hole punch control PC board (HP)
Remedy: Paper If there is any paper remaining on the transport path, remove the paper. Sideways adjustment motor (M2) • If there is mechanical problem when the sideways adjustment motor (M2) is rotated, fix the mechanism. • Check the connector (CN10) and harnesses between the hole punch control PC board (HP) and sideways adjustment motor (M2). Sideways deviation home position sensor (S3) • Sensor check • Harness check • Connector check (CN8)