Description: Skew adjustment motor (M1) abnormality MJ-1109/1110 (When MJ-6105 is installed) * The [CC52] error occurs when the [ED10] error occurs three times in succession or during the initial operation.
Causes: Skew home position sensor (S2) Skew adjustment motor (M1) Hole punch control PC board (HP)
Remedy: Paper If there is any paper remaining on the transport path, remove the paper. Skew adjustment motor (M1) • If there is mechanical problem when the skew adjustment motor (M1) is rotated, fix the mechanism. • Check the connector (CN10) and harnesses between the hole punch control PC board (HP) and skew adjustment motor (M1). Skew home position sensor (S2) • Sensor check • Harness check • Connector check (CN10)