Description: [MJ-1109/1110] Stack exit belt home position error
Causes: Stack belt exit home position sensor (S9) Stack transport motor (M8) Finisher controller PC board (FIN)
Remedy: Stack belt exit home position sensor (S9) Check if there is a disconnection of the connector, incorrect installation or breakage of the stack belt exit home position sensor (S9). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN25) on the finisher controller PC board is disconnected from the stack belt exit home position sensor (S9) and the harnesses are open circuited. Correct if any. Stack transport motor (M8) Check if the connector (CN18) on the finisher controller PC board is disconnected from the stack transport motor (M8) and the harnesses are open circuited. Correct if any.