Code: E550
Description: Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feeding)
Causes: Sensor. LGC board
Remedy: 1 Open the cover of the unit/ area whose picture is blinking on the control panel. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table) Yes 3 No • Check if the connector of the sensor is disconnected. • Check if any of the connectors on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the sensor. • Replace the LGC board. 3 LGC board • Replace the LGC board.
Registration area Automatic duplexing unit Registration sensor FS-03-[ALL]OFF/[9]/[A] 1st transport sensor FS-03-[ALL]OFF/[9]/[B] Exit area Automatic duplexing unit Exit sensor FS-03-[ALL]OFF/[9]/[C] ADU ADU ADU entrance sensor FS-03-[ALL]OFF/[9]/[G] ADU exit sensor FS-03-[ALL]OFF/[9]/[H] Feeding area (Main unit) Feed cover 2nd transport sensor FS-03-[F3]ON/[4]/[D] LCF LCF side cover LCF feed sensor FS-03-[F1]ON/[9]/[F] PFP PFP side cover PFP upper drawer feed sensor FS-03-[F3]ON/[0]/[C] PFP lower drawer feed sensor FS-03-[F3]ON/[0]/[D] Bridge unit Bridge unit Bridge unit transport sensor-1 FS-03-[ALL]OFF/[0]/[A] Bridge unit transport sensor-2 FS-03-[ALL]OFF/[0]/[B] JSP JSP cover JSP feed sensor FS-03-[ALL]OFF/[0]/[A] Finisher Finisher door Sensors in the finisher
Registration area Automatic duplexing unit Registration sensor FS-03-[ALL]OFF/[9]/[A] 1st transport sensor FS-03-[ALL]OFF/[9]/[B] Exit area Automatic duplexing unit Exit sensor FS-03-[ALL]OFF/[9]/[C] ADU ADU ADU entrance sensor FS-03-[ALL]OFF/[9]/[G] ADU exit sensor FS-03-[ALL]OFF/[9]/[H] Feeding area (Main unit) Feed cover 2nd transport sensor FS-03-[F3]ON/[4]/[D] LCF LCF side cover LCF feed sensor FS-03-[F1]ON/[9]/[F] PFP PFP side cover PFP upper drawer feed sensor FS-03-[F3]ON/[0]/[C] PFP lower drawer feed sensor FS-03-[F3]ON/[0]/[D] Bridge unit Bridge unit Bridge unit transport sensor-1 FS-03-[ALL]OFF/[0]/[A] Bridge unit transport sensor-2 FS-03-[ALL]OFF/[0]/[B] JSP JSP cover JSP feed sensor FS-03-[ALL]OFF/[0]/[A] Finisher Finisher door Sensors in the finisher