Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
Causes: Reading start guide of the RADF Paper guide of the RADF Read sensor RADF board Registration roller Replace it if it is worn out. Read roller Replace it if it is worn out.
Remedy: Registration sensor Read roller Clean the registration roller and the read roller if they are stained. Read sensor • Sensor check (Perform the input check: FS-03- [F3]ON[7]/[G]) • Connector check (CN75, J94) • Harness check RADF board • Board check • Connector check (CN75) • Harness check