Description: Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec. [MJ-1109/1110]
Causes: Entrance sensor (S1) Transport sensor (S2) Finisher control PC board (FIN)
Remedy: Paper • Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. • Use paper accepted in the specifications. Entrance sensor (S1) • Sensor check • Connector check • Harness check Transport sensor (S2) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN8) • Harness check