Code: E110
Description: ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
Causes: Registration sensor DRV board LGC board Rollers in the ADU Clean or replace it.
Remedy: Paper stop jam at the registration roller position Registration guide Check the registration guide. Replace it if needed. All Registration sensor • Sensor check (Perform the input check: 03- [ALL]OFF/[9]/[A]) • Connector check (J1077, J1114) • Harness check DRV board • Board check • Connector check (CN450, CN451, CN462) • Harness check LGC board • Board check • Connector check (CN361, CN362) • Harness check ADU Check if the connector between the ADU and equipment is connected.