Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi ED12 — Toshiba e-Studio 5055C

Code: ED12

Description: Shutter home position error: The shutter is not at the home position. [MJ-1107/1108]
Causes: MJ-1107 Movable tray paper-full sensor Shutter opening/closing sensor Shutter clutch Finisher controller PC board
MJ-1108 Movable tray paper-full sensor Shutter opening/closing sensor Shutter clutch Finisher controller PC board
Remedy: MJ-1107 Movable tray paper-full sensor Fix any mechanical problem occurring when the actuator is moved. Check if there is a disconnection of the connector, incorrect installation or breakage of the movable tray paper-full sensor (S16). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN13) on the finisher controller PC board is disconnected from the movable tray paper-full sensor (S16) and the harnesses are open circuited. Correct if so. Shutter Open and close the shutter. Fix any mechanical problem. Shutter opening/closing sensor Check if there is a disconnection of the connector, incorrect installation or breakage of the shutter opening/closing sensor (S4). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN13) on the finisher controller PC board is disconnected from the shutter opening/closing sensor (S4) and the harnesses are open circuited. Correct if so. Shutter clutch Check if the connector (CN5) on the finisher controller PC board is disconnected from the shutter clutch (CLT1) and the harnesses are open circuited. Correct if so.
MJ-1108 Movable tray paper-full sensor Fix any mechanical problem occurring when the actuator is moved. Check if there is a disconnection of the connector, incorrect installation or breakage of the movable tray paper-full sensor (S16). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN12) on the finisher controller PC board is disconnected from the movable tray paper-full sensor (S16) and the harnesses are open circuited. Correct if so. Shutter Open and close the shutter. Fix any mechanical problem. Shutter opening/closing sensor Check if there is a disconnection of the connector, incorrect installation or breakage of the shutter opening/closing sensor (S4). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN12) on the finisher controller PC board is disconnected from the shutter opening/closing sensor (S4) and the harnesses are open circuited. Correct if so. Shutter clutch Check if the connector (CN10) on the finisher controller PC board is disconnected from the shutter clutch (CLT1) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 5055C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie