Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA20 — Toshiba e-Studio 506

Code: EA20

Description: Paper transport stop jam: The paper does not pass through the inlet sensor. [MJ-1025/MJ-1031] Paper transport stop jam: The paper has passed through the inlet sensor but does not reach or pass the feed path sensor or processing tray sensor. [MJ-1024] Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor. [MJ- 1101
Causes: MJ-1101 Transport sensor Finisher controller PC board
MJ-1106 Entrance sensor (S1) Finisher control PC board (FIN)
Remedy: MJ-1101 Transport sensor • Sensor check • Connector check (S2) • Harness check Finisher controller PC board Board check(CN22)
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN26) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 506

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie