Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA80 — Toshiba e-Studio 506SE

Code: EA80

Description: Stapling jam: Stapling is not performed properly. [MJ-1032/MJ-1033]
Causes: Stitcher home position switch Finisher controller PC board
Remedy: Finisher • Check if there is any paper in the finisher, saddle stitcher, or on the transport path of the equipment, or on the stapling tray. Remove it if there is. • Remove the staple cartridge from the finisher and remove staples stuck in the stapling unit. Stitcher home position switch • Check if the connector on the saddle stitcher controller PC board is disconnected or the harnesses are open circuited. Correct if any. • Check if the stitcher home position switches are working properly.

← Xem tất cả mã lỗi Toshiba e-Studio 506SE

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie