Description: Stapling jam: Stapling is not performed properly.
Remedy: Is there any paper remaining on the transport path in the finisher, saddle stitcher section or main unit, or on the stapling tray? → YES . Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staples stuck in the stapling unit? → YES . End NO Is the connector J8 on the saddle stitcher controller PC board disconnected? Is the harness connecting the saddle stitcher controller PC board and stitcher home position switch (rear: MS5S, front: MS7S) open-circuited? → YES . Connect the connector securely. Replace the harness. NO Are the stitcher home position switches working properly? ll → NO . 1) Connect the connectors of the stitcher home position switches securely. 2) Replace the stitcher home position switches. YES Replace the saddle stitcher controller PC board.