Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E45 — Toshiba e-Studio 550

Code: E45

Description: LCF side cover opened during printing
Remedy: Is the LCF open? YES Remove the paper if there is any, then close the LCF. NO Is the LCF set sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[1]/[G]) NO 1. Check if the connector of the LCF set sensor is disconnected. 2. Check if either of the connectors J801 to 804 on the LCF board is disconnected. 3. Check if the connector J346 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the LCF board and LGC board are short- or open-circuited. 6. Replace the LCF set sensor. 7. Replace the LCF board. 8. Replace the LGC board. YES 1. Replace the LCF board. 2. Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie