Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E46 — Toshiba e-Studio 550

Code: E46

Description: Bypass feed unit cover opened during printing
Remedy: Is the bypass feed unit cover open? YES Remove the paper if there is any, then close the bypass feed unit cover. NO Is the bypass feed unit cover sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[7]/[G]) NO 1. Check if the connector of the bypass feed unit cover sensor is disconnected. 2. Check if the connector J338 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the LGC board are short- or open-circuited. 5. Replace the bypass feed unit cover sensor. 6. Replace the LGC board. YES 2. Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie