Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C180 — Toshiba e-Studio 5520c

Code: C180

Description: LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally. (the case that paper can be fed from any drawer except the LCF)
Remedy: Does the tray move? (Perform the output check: 03-257) NO 1. Check if the connector of the LCF tray-up motor is disconnected. 2. Check if the connector CN507 on the PFC board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are open circuited. 4. Check if the conductor patterns on the PFC board is short circuited or open circuited. 5. Replace the LCF tray-up motor. 6. Replace the PFC board. YES Are the LCF tray-up sensor and LCF tray bottom sensor working? (Perform the input check: 03-[CopyON]/[9]/[F], [ScanON]/[2]/[E]) NO 1. Check if the connectors of the sensors are disconnected. 2. Check if the connector CN505 and CN507 on the PFC board is disconnected. 3. Check if the slit reaches the sensors. 4. Check if the connector pins are disconnected or the harnesses are open circuited. 5. Check if the conductor patterns on the PFC board is short circuited or open circuited. 6. Replace the sensor. 7. Replace the PFC board. YES 1. Check if the conductor pattern on the PFC board is short circuited or open circuited. 2. Replace the PFC board.

← Xem tất cả mã lỗi Toshiba e-Studio 5520c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie