Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E150 — Toshiba e-Studio 5520c

Code: E150

Description: 3rd drawer misfeeding (Paper not reaching the 3rd drawer feed sensor): The paper fed from the 3rd drawer does not reach the 3rd drawer feed sensor
Remedy: 1. Open the paper feed cover and check if there is any paper in front of the 3rd drawer feed sensor. Remove it if there is. * If the error still occurs, check the following. 2. Is the 3rd drawer feed sensor working? (Perform the input check: 03-[FAX]OFF/[2]/[D]) * If it is working properly, proceed to 7. If not, check 3 to 6 below. 3. Check if the connector CN505 on the PFC board is disconnected from the 3rd drawer feed sensor or the harnesses is open circuited. Check if the connector CN505 on the PFC board is disconnected. Correct if any. 4. Replace the 3rd drawer feed sensor. 5. Replace the PFC board. 6. Is the feed/transfer motor working? (Perform the output check: 03-226) * If it is working properly, proceed to 12. If not, check 8 to 11 below. 7. Check if the connectors CN502 on the LGC board is disconnected from the feed/transfer motor or the harnesses are open circuited. Check if the connector CN502 on the PFC board is disconnected. Correct if any. 8. Replace the feed/transfer motor. 9. Replace the PFC board. 10.Check the 3rd drawer feed roller, separation roller and pickup roller. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 5520c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie