Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E370 — Toshiba e-Studio 5520c

Code: E370

Description: 3rd drawer misfeeding (Paper not reaching the 3rd drawer transport sensor): Paper fed from the 3rd drawer does not reach the 3rd drawer transport sensor.
Remedy: 1. Is the 3rd drawer transport sensor working? (Perform the input check: 03-[SCAN]ON/[1]/[B]). * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN505 on the PFC board is disconnected from the 3rd drawer transport sensor or the harnesses are open circuited. Correct if so. 3. Check if the 3rd drawer transport sensor is correctly installed or its detecting element is not damaged or stained. 4. Replace the 3rd drawer transport sensor. 5. Replace the PFC board. 6. Are the 3rd drawer transport clutch and the 3rd drawer feed clutch working? (Perform the output check: 03-252, 03-250.) * If they are working properly, proceed to 9. If not, check 7 to 8 below. 7. Check if the connector CN502 on the PFC board is disconnected from the 3rd drawer transport clutch or the 3rd drawer feed clutch, or the harnesses are open circuited. Correct if so. 8. Replace the 3rd drawer transport clutch or the 3rd drawer feed clutch. 9. Is the feed/transport motor working? (Perform the output check: 03-122.)) * If they are working properly, proceed to 12. If not, check 10 to 11 below. 10.Replace the feed/transport motor. 11.Replace the PFC board. 12.Check if there is any abnormality on the driving section of the feed/transport motor or the roller. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 5520c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie