Code: E380
Description: 4th drawer misfeeding (Paper not reaching the 4th drawer transport sensor): Paper fed from the 4th drawer does not reach the 4th drawer transport sensor.
Remedy: 1. Is the 4th drawer transport sensor working? (Perform the input check: 03-[COPY]ON/[5]/[E]). * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN516 on the PFC board is disconnected from the 4th drawer transport sensor or the harnesses are open circuited. Correct if so. 3. Check if the 4th drawer transport sensor is correctly installed or its detecting element is not damaged or stained. 4. Replace the 4th drawer transport sensor. 5. Replace the PFC board. 6. Are the 4th drawer transport clutch and the 4th drawer feed clutch working? (Perform the output check: 03-253, 03-251.) * If they are working properly, proceed to 9. If not, check 7 to 8 below. 7. Check if the connector CN502 on the PFC board is disconnected from the 4th drawer transport clutch or the 4th drawer feed clutch, or the harnesses are open circuited. Correct if so. 8. Replace the 4th drawer transport clutch or the 4th drawer feed clutch. 9. Is the feed/transport motor working? (Perform the output check: 03-122.) * If they are working properly, proceed to 12. If not, check 10 to 11 below. 10.Replace the feed/transport motor. 11.Replace the PFC board. 12.Check if there is any abnormality on the driving section of the feed/transport motor or the roller. Correct if any.