Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA50 — Toshiba e-Studio 5520c

Code: EA50

Description: Stapling jam: Stapling is not performed properly. [MJ-1103/1104]
Remedy: 1. Check if there is any paper in the finisher or on the transport path of the equipment or on the finishing tray. Remove it if there is. 2. Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? 3. heck if the actuator of the stapler interference sensor (S11) moves smoothly. 4. Check if the connector CN2 on the finisher controller PC board is disconnected from the stapler or the harnesses are open circuited. Correct if any. 5. Check the harnesses in the stapler are disconnected or open circuited. Correct if any. 6. Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 5520c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie