Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E180 — Toshiba e-Studio 5530c

Code: E180

Description: Option LCF misfeeding (Paper not reaching the LCF feed sensor): Paper fed from the LCF does not reach the LCF feed sensor.
Remedy: 1. Is the LCF feed sensor working? (Perform the input check: 03-[SCAN]ON/[5]/[E]). * If it is working properly, proceed to 7. If not, check 2 to 6 below. 2. Check if the connector CN503 on the PFC board is disconnected from the LCF feed sensor or the harnesses are open circuited. Correct if so. 3. Check if the LCF feed sensor is correctly installed or the actuator is properly moved. 4. Replace the LCF feed sensor. 5. Replace the LCF board. 6. Replace the PFC board. 7. Is the LCF transport motor working? (Perform the output check: 03-127.) * IIf it is working properly, proceed to 11. If not, check 8 to 10 below. 8. Check if the connector CN503 on the PFC board is disconnected from the LCF transport motor or the harnesses are open circuited. Correct if so (including J854 and J850 on the LCF board). 9. Replace the LCF transport motor. 10.Replace the PFC board. 11.Check if there is any abnormality on the driving section of the LCF transport motor the roller. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 5530c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie