Description: Developer unit motor-K locking error: The developer unit motor-K is not rotating normally.
Causes: Developer unit motor-K LGC board
Remedy: LGC board • Connector check (CN313) • Harness check • Board check Developer unit motor-K • Motor check (Perform the output check: 03-112) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check Developer unit • Check if waste toner is clogged on the waste toner transport path of the K-drum cleaner. • Check if the developer material is excessively supplied to the K-developer unit. Drive unit • Unit check • Gear check Drum cleaner unit Check if waste toner is clogged on the toner recovery auger section. Process unit Drive section Check if the gear tooth flank is damaged. Check if there is any dust between the gear and the shaft. Check if the contact section between the gear and the shaft is worn out.