Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E9F0 — Toshiba e-Studio 5540c

Code: E9F0

Description: Punching jam: Punching is not performed properly. [MJ-1103/1104 (when MJ-6102 is installed)]
Causes: Punch HP sensor (S4) Punch motor (M3) Punch controller board
Remedy: Finisher, saddle stitcher • Check if there is any paper in the finisher, punch unit or the on the transport path of the equipment. Remove it if there is. Punch HP sensor (S4) • Sensor check • Connector check • Harness check Punch motor (M3) • Motor check • Connector check • Harness check Punch controller board • Connector check • Board check

← Xem tất cả mã lỗi Toshiba e-Studio 5540c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie