Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 88 — Brother DCP163C

Code: 88

Description: Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.)
Causes:
Remedy: Jam clear cover not closed correctly Close the jam clear cover correctly. Registration sensor harness not connected correctly Correct the connection. Bank ASSY deformed Replace the bank ASSY. Paper pull-in rollers defective Replace the paper pull-in rollers. Mode switching lever (at the right end of CR guide rail) not sliding smoothly Clean the mode switching lever. At the ends of the paper feed roller shaft, any gear(s) damaged Replace the engine unit. Paper feed motor defective Main PCB defective Replace the main PCB.

← Xem tất cả mã lỗi Brother DCP163C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie