Code: CE71
Description: Drum phase adjustment abnormality: Drum phase sensors (Color drum phase sensor and K drum phase sensor) are not turned ON after the drum motor was rotated for a specified period of time.
Causes: Drum motor (K) Drum motor (YMC) K drum phase sensor Color drum phase sensor LGC board Cleaning blade (Y, M, C, K) Needle electrode Drum (Y, M, C, K)
Remedy: LGC board • Connector check (CN313, CN315) Drum motor (K) (M27) • Motor check (Perform the output check: 03-110) • Connector check • Harness check Drum motor (YMC) (M28) • Motor check (Perform the output check: 03-110) • Connector check • Driving section check (Is there any abnormality on the rotation?) • Harness check K drum phase sensor (S44) • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/B) • Connector check • Harness check Color drum phase sensor (S43) • Sensor check (Perform the input check: 03-[ALL]OFF/[9]/A) • Connector check • Harness check Drum cleaner unit (Y, M, C, K) • Cleaning blade check (Check if it turns up.) Main charger unit • Needle electrode check Drum (Y, M, C, K) • Drum check (Check if the aluminum section of the drum flange is worn out.)