Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E5A0 — Toshiba e-Studio 603

Code: E5A0

Description: Paper not reaching exit sensor: The leading edge of paper does not reach the exit sensor.
Remedy: Is the exit sensor working? (Perform the input check in the test mode: 03-[FAX]ON/ [1]/[C]) ↓ → NO . 1) Check if the connector of the exit sensor is not disconnected. 2) Check if the connector CN335 on the LGC board is not disconnected. 3) Check if the connector pins are not disconnected and the harness is not open circuited. 4) Check if the conductor pattern on the LGC board is not short- or open circuited. 5) Replace the exit sensor. 6) Replace the LGC board. YES <Simple discharging> Is the gate solenoid working? (Perform the output check in the test mode: 03-274) ↓ → NO . 1) Check if the connector of the gate solenoid is not disconnected. 2) Check if the connector CN335 on the LGC board is not disconnected. 3) Check if the connector pins are not disconnected and the harness is not open circuited. 4) Check if the conductor pattern on the LGC board is not short- or open circuited. 5) Replace the LGC board. YES Replace the LGC board. <Reversal discharging> 1) Check if the setting of the paper size is correct. 2) Check if there is no abnormality and extraneous material at the guide and myler in front of the exit roller. * Perform 05-447 for thick paper to increase the value by 2 to 4.

← Xem tất cả mã lỗi Toshiba e-Studio 603

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie