Description: Feed signal reception jam: The feed signal is received while no original is placed on the original feeding tray.
Remedy: Is the original empty sensor working? (Perform the input check: 03-[FAX]ON/[7]/[B]) ↓ → NO → 1) Check if the lever of original empty sensor is working normally. 2) Check if the connector of the original empty sensor is disconnected. 3) Check if the connector CN5 on the ADF board is disconnected. 4) Check if the connector pins are disconnected or the harnesses are open circuited. 5) Check if the conductor pattern on the ADF board is short circuited or open circuited. 6) Replace the original empty sensor. 7) Replace the ADF board. YES Replace the ADF board.