Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA50 — Toshiba e-Studio 603

Code: EA50

Description: Stapling jam: Stapling is not performed properly.
Remedy: Is there any paper remaining on the transport path in the finisher or equipment or on the stapling tray? → YES → Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet slid from the staple case? → YES → End. NO Is the connector J8 on the finisher controller PC board disconnected? Is the harness connecting the finisher controller PC board and stapling home position sensor (PI22) open circuited? → YES → Connect the connector securely. Replace the harness. NO Is the stapling home position sensor working properly? l → NO → 1) Connect the connector of the stapling home position sensor securely. 2) Replace the stapling home position sensor. YES Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 603

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie