Code: C58
Description: Communication error between IPC and the finisher
Remedy: (1) Make sure that only the specified finisher is attached. (2) Check the pattern on the IPC board for breaks and short-circuits. (3) Check the harness connected to connector J2 on the IPC board for disconnected pins and breaks. (4) Check fuse F5 on the power supply unit to see if it is blown. (5) Check the pattern on the control board inside the finisher for breaks and short-circuits. (6) Check the connectors leading up to the PPC board for disconnected pins and the harness for breaks (7) Replace the IPC board. (8) Replace the LGC board