Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C150 — Toshiba e-Studio 6520c

Code: C150

Description: 3rd drawer tray abnormality: The 3rd drawer tray-up motor is not rotating or the 3rd drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 3rd drawer)
Remedy: Does the tray go up? (Perform the output check: 03-248, 249) NO 1. Check if the connector of the tray-up motor is disconnected. 2. Check if the connector CN504 on the PFC board is disconnected. 3. Check if the connector pins are disconnected or the harnesses are open circuited. 4. Check if the conductor patterns on the PFC board is short circuited or open circuited. 5. Replace the tray-up motor. 6. Replace the PFC board. YES Is the tray-up sensor working? (Perform the input check: 03-[CopyON]/[9]/[F], /[9]/[E]) NO 1. Check if the connector of the sensor is disconnected. 2. Check if any of the connectors CN505 and CN506 on the PFC board is disconnected. 3. Check if the slit reaches the sensor. 4. Check if the connector pins are disconnected or the harnesses are open circuited. 5. Check if the conductor patterns on the PFC board is short circuited or open circuited. 6. Replace the tray-up sensor. 7. Replace the PFC board. YES 1. Check if the conductor pattern on the PFC board is short circuited or open circuited. 2. Replace the PFC board.

← Xem tất cả mã lỗi Toshiba e-Studio 6520c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie