Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E190 — Toshiba e-Studio 6530c

Code: E190

Description: LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor.
Remedy: 1. Open the LCF side cover and check if there is any paper in front of the LCF feed sensor. Remove it if there is. * If the error still occurs, check the following. 2. Is the LCF feed sensor working? (Perform the input check: 03-[FAX]OFF/[0]/[G]) * If it is working properly, proceed to 7. If not, check 3 to 6 below. 3. Check if the connectors CN349 on the LGC board is disconnected from the LCF feed sensor or the harnesses are open circuited. Check if the connectors CN1 and CN6 on the LCF board are disconnected. Correct if any. 4. Replace the LCF feed sensor. 5. Replace the LGC board. 6. Is the LCF feed clutch working? (Perform the output check: 03-209) * If it is working properly, proceed to 12. If not, check 8 to 11 below. 7. Check if the connectors CN349 on the LGC board is disconnected from the LCF feed clutch or the harnesses are open circuited. Check if the connectors CN1 and CN5 on the LCF board are disconnected. Correct if any. 8. Replace the LCF feed clutch. 9. Replace the LGC board. 10.Check the LCF feed roller, separation roller and pickup roller. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 6530c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie