Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E240 — Toshiba e-Studio 6530c

Code: E240

Description: 2nd drawer misfeeding (Paper not reaching the 2nd drawer transport sensor): Paper fed from the 2nd drawer does not reach the 2nd drawer transport sensor.
Remedy: 1. Is the 2nd drawer transport sensor working? (Perform the input check: 03-[SCAN]ON/[1]/[C]). * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN513 on the PFC board is disconnected from the 2nd drawer transport sensor or the harnesses are open circuited. Correct if so. 3. Check if the 2nd drawer transport sensor is correctly installed or its detecting element is not damaged or stained. 4. Replace the 2nd drawer transport sensor. 5. Replace the PFC board. 6. Are the transport motor-2 and the feed motor working? (Perform the output check: 03-125, 03- 121.) * If they are working properly, proceed to 10. If not, check 7 to 9 below. 7. Check if the connector CN512 on the PFC board is disconnected from the transport motor-2 or the feed motor, or the harnesses are open circuited. Correct if so. 8. Replace the transport motor-2 or the feed motor. 9. Replace the PFC board. 10.Check if there is any abnormality on the driving section of each motor or the roller. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 6530c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie