Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E260 — Toshiba e-Studio 6530c

Code: E260

Description: Option LCF transport jam (Paper not reaching the registration sensor)
Remedy: 1. Is the registration sensor working? (Perform the input check: 03-[COPY]ON/[5]/[H]). * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN516 on the PFC board is disconnected from the registration sensor or the harnesses are open circuited. Correct if so. 3. Check if the registration sensor is correctly installed or its detecting element is not damaged or stained. 4. Replace the registration sensor. 5. Replace the PFC board. 6. Is the transport motor-1 working? (Perform the output check: 03-124.) * If they are working properly, proceed to 10. If not, check 7 to 9 below. 7. Check if the connector CN512 on the PFC board is disconnected from the transport motor-1 or the harnesses are open circuited. Correct if so. 8. Replace the transport motor-1. 9. Replace the PFC board. 10.Check if there is any abnormality on the driving section of the transport motor-1 or the roller. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 6530c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie