Remedy: Option LCF hook Check that the optional LCF is hooked by two positions on the equipment.If it is not hooked securely, perform its height adjustment. Gaps between the equipment and the optional LCF Check that the gaps between the equipment and the optional LCF on the upper and lower positions are even. If the gap on the upper position is wider than that on the lower position, perform height adjustment of the optional LCF. Option LCF tray-up motor • Motor check (Perform the output check: 03-270) • Connector check • Harness check Option LCF tray-up sensor • Sensor check (Perform the input check: 03-[SCAN]ON/[5]/[H]) • Connector check • Harness check LCF board • Connector check • Board check PFC board • Connector check (CN503) • Harness check • Board check