Code: C448
Description: IH continuous lighting abnormality: IH lights continuously for a certain period of time when the pressure roller temperature during ready status is higher than the specified
Causes: Thermopiles Fuser unit Power supply LGC board
Remedy: Power supply • Check if the power voltage is normal.(Is the voltage during the operation ±10% of the rated voltage?) • Check the power supply unit. • Connector check (CN403, CN409) Thermopiles • Check if foreign matter or paper in the fuser unit is plugging up the monitoring opening of the fuser belt thermopile. • Check if the opening of the fuser belt thermopile of the equipment is plugged up. Fuser unit • Unit check • Connector check • Harness check LGC board • Connector check (CN305) • Harness check Status counter 1. [0], [8] Power ON. 2. Key in “2002”, then press [START]. 3. Change the displayed current status counter value “32” to “0”, then press [ENTER] or [INTERRUPT] (to cancel C448). 4. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.