Code: CA00
Description: Image position alignment abnormality
Causes:
Remedy: < Invalidating image position alignment control > 1 [0] [8] Power ON 2 [4546] [START] 3 Set the value to “0” (not performed automatically). 4 Power OFF < Checking the abnormal status on image position alignment > 5 [0] [5] Power ON 6 [4720] [START] 7 Press the [START] button again, then check the displayed value. (05-4720-0: Displaying the cause of image position alignment detection error front and rear sides.) When the error [CA00] occurs, the value between 1 and 255 is displayed. (0: Detection normality on the front and rear sides) (The statues of total 8 sections (4 colors on the front and rear sides) are displayed.) 1 :Y on the rear side detection abnormality (*1) 2 : Y on the front side detection abnormality (*1) 3 : Y on the front and rear sides detection abnormality 4 : M on the rear side detection abnormality (*1) 8 : M on the front side detection abnormality (*1) 12 : M on the front and rear sides detection abnormality 16 : C on the rear side detection abnormality (*1) 32 : C on the front side detection abnormality (*1) 48 : C on the front and rear sides detection abnormality 64 : K on the rear side detection abnormality (*1) 85 : All colors on the rear side detection abnormality → (I) 128: K on the front side detection abnormality (*1) 170: All colors on the front side detection abnormality → (I) 192: K on the front and rear sides detection abnormality 255: All colors on the front and rear sides detection abnormality → (I) Other than the above: Multiple colors detection abnormality (*2) The adjustment value is the sum of (*1), which, as in the example below, specifies the cause of the detection abnormality. (E.g. 1) 05-4720-0 --- in case of 72 72 = 64 + 8 → K on the rear side / M on the front side detection abnormality (E.g. 2) 05-4720-0 --- in case of 146 146 = 128 + 18 = 128 + 16 + 2 → K on the front side / C on the rear side / Y on the front side detection abnormality 8 Press the [START] button 9 After [1] is pressed, then press the [START] button. 10 Check the displayed value. (05-4720-1: Displaying the cause of image position alignment detection error center side.) When the error [CA00] occurs, the value between 1 and 85 is displayed. (0: Detection normality on the center side) (The statues of total 4 sections (4 colors on the front and rear sides) are displayed.) 1 : Y on the center side detection abnormality (*3) 4 : M on the center side detection abnormality (*3) 16 : C on the center side detection abnormality (*3) 64 : K on the center side detection abnormality (*3) 85 : All colors on the center side detection abnormality → (I) Other than the above: Multiple colors detection abnormality (*4) The adjustment value is the sum of (*3), which, as in the example below, specifies the cause of the detection abnormality. (E.g. 1) 05-4720-1 --- in case of 65 65 = 64 + 1 → K on the center side / Y on the center side detection abnormality 11 If the adjustment value fits (I) in step 7 or 10, proceed to step (12). In other cases, proceed to step (30). →