Code: E930
Description: Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1.
Causes: Bridge unit transport sensor-2 LGC board Roller Transport roller of the bridge unit
Remedy: Bridge unit • Check if there is any paper in the bridge unit and remove it if there is Bridge unit path exit sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[1]/[A], 03- [SCAN]ON/[3]/[C]) • Connector check • Harness check Transport path switching solenoid-2 • Solenoid check (Perform the output check: 03-276) • Connector check • Harness check Bridge unit transport exit motor: Normal rotation Bridge unit transport exit motor: Reverse rotation • Motor check (Perform the output check: 03-140/190, 03-142/192) • Connector check • Harness check LGC board • Connector check (CN309) • Board check DRV board • Connector check (CN537, CN539) • Harness check • Board check PFC board • Connector check (CN500, CN515) • Harness check • Board check