Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E940 — Toshiba e-Studio 6540c

Code: E940

Description: Stop jam at the bridge unit transport sensor 2: The trailing edge of the paper does not pass the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 2.
Causes: Bridge unit transport sensor-2 LGC board Roller Transport roller of the bridge unit
Remedy: Bridge unit • Check if there is any paper in the bridge unit and remove it if there is Bridge unit path exit sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[1]/[A], 03- [SCAN]ON/[3]/[C]) • Connector check • Harness check Transport path switching solenoid-2 • Solenoid check (Perform the output check: 03-276) • Connector check • Harness check Bridge unit transport exit motor: Normal rotation Bridge unit transport exit motor: Reverse rotation • Motor check (Perform the output check: 03-140/190, 03-142/192) • Connector check • Harness check LGC board • Connector check (CN309) • Board check DRV board • Connector check (CN537, CN539) • Harness check • Board check PFC board • Connector check (CN500, CN515) • Harness check • Board check

← Xem tất cả mã lỗi Toshiba e-Studio 6540c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie