Code: EB50
Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.
Causes: 1st drawer feed sensor Bypass feed sensor ADU exit sensor Registration sensor 1st drawer feed sensor 2nd drawer feed sensor ADU board LGC board Rollers
Remedy: 1st drawer feed sensor (When the paper is fed from the 1st drawer:) • Sensor check (Perform the input check: 03-[SCAN]ON/[1]/[H]) • Connector check • Harness check Bypass feed sensor (When the paper is fed from the bypass feed unit:) • Sensor check (Perform the input check: 03-[SCAN]ON/[3]/[A]) • Connector check • Harness check ADU exit sensor (When the paper is fed from the ADU:) • Sensor check (Perform the input check: 03-[SCAN]ON/[3]/[G]) • Connector check • Harness check Registration sensor (When the paper is fed from the ADU:) • Sensor check (Perform the input check: 03-[ALL]OFF/[4]/[B], 03- [COPY]ON/[5]/[H]) • Connector check • Harness check 1st drawer feed sensor (When the paper is fed from any of the 2nd drawer, PFP or LCF:) • Sensor check (Perform the input check: 03-[SCAN]ON/[1]/[H]) • Connector check • Harness check 2nd drawer feed sensor (When the paper is fed from any of the 2nd drawer, PFP or LCF:) • Sensor check (Perform the input check: 03-[SCAN]ON/[1]/[G]) • Connector check • Harness check ADU board • Connector check (CN211, CN213) • Board check LGC board • Connector check (CN337, CN338, CN347, CN348) • Board check Drive unit, Rollers • Gear check • Roller check