Description: Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position. [MJ-1103/1104 (when MJ6102 is installed)]
Causes: Sideways adjustment motor (M2) Sideways deviation HP sensor (S3 Punch controller board
Remedy: Finisher • Check if there is any paper in the finisher. Remove it if there is. Sideways adjustment motor (M2) • Rotate sideways adjustment motor and fix its mechanism if it does not rotate smoothly. • Motor check • Connector check • Harness check Sideways deviation HP sensor (S3) • Sensor check • Connector check • Harness check Punch controller board • Connector check • Board check