Code: C270
Description: (1) Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified time. (2) Downloading firmware with an incorrect model.
Causes: Carriage home position sensor Carriage home position sensor harness SLG board Scan motor Scan motor harness
Remedy: 1 Carriage lock Check if the carriage locking screw for packaging is attached. 2 Carriage home position sensor 1. Check if the harness of the carriage home position sensor is connected properly. 2. Check if the harness is caught or open circuited. 3 SLG board 1. Check if the connector of the carriage home position sensor on the SLG board is connected properly. 2. Check if the mounted parts on the SLG board are damaged or abnormal. 3. If the model of the firmware downloaded is incorrect, a C270 error (exposure lamp blinks twice) occurs. If the exposure lamp blinks twice, download the correct ROM. 4 Scan motor 1. Check if the belt tension is loosened. 2. Check if the motor fixing screw is loosened. 3. Check if the carriage wire and the timing belt come off. 4. Check if the connector is connected to the motor properly. 5. Check if the harness of the motor is caught or open circuited.