Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C360 — Toshiba e-Studio 6550c

Code: C360

Description: Needle electrode cleaner operation abnormality
Causes: Needle electrode cleaner detection sensor Needle electrode cleaner drive motor EPU board LGC board
Remedy: EPU tray (process unit) • Connection check (05-2788) • Perform the code 08-4606- 0 to -3 (-0: K, -1: Y, -2: M, -3: C) to check which station the error is found. • Connector check • Harness check Needle electrode cleaner detection sensor (S30 - S33) • Sensor check (Perform the input check: K: 03-[FAX]ON/[0]/[E]), C: 03- [FAX]ON/[0]/[H]), M: 03-[FAX]ON/[9]/[C]), Y: 03-[FAX]ON/ [9]/[F]) • Check if the needle electrode cleaner detection sensors (S30 - S33) are coming off of the plate of the EPU tray. • Connector check • Harness check Needle electrode cleaner drive motors (M23 - M26) • Motor check (Perform the output check: K: 03-207, C: 03-206, M: 03- 205, Y: 03-204) • Connector check • Harness check Needle electrode cleaner drive section • Check if the needle electrode cleaner drive section rotates smoothly, and if it does not, clean or replace it. EPU board • Connector check (CN550, CN551, CN553, CN554, CN555, CN556) • Board check LGC board • Connector check (CN308, CN310) • Harness check • Board check

← Xem tất cả mã lỗi Toshiba e-Studio 6550c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie