Code: E0A0
Description: Image transport ready time-out jam: Image data to be printed cannot be sent.
Causes: SYS board IMG board LGC board HDD
Remedy: Other • Remove the paper remained in front of the registration sensor. • If the error still occurs, check the following. Power Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check (SYS board -IMG board) (CN135) • Board check IMG board • Connector check (IMG board -SLG board) (IMG board - LGC board) (CN422, CN423, CN424) • Harness check • Board check LGC board • Connector check (CN319, CN320) • Harness check • Board check HDD • Connector check • HDD check