Code: E770
Description: Original width detection sensor-1 paper remaining jam
Causes: Original exit reverse sensor
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board Perform the 05-3210
Roller
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board Perform the 05-3210
Roller
Remedy: RADF • Check if there is any paper on each sensor. Remove it if there is. Original exit reverse sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[B]) • Connector check • Harness check Registration sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[F]) • Connector check • Harness check Original width detection sensor-1 • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Original width detection sensor-2 • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[H]) • Connector check • Harness check Original width detection sensor-3 • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[D]) • Connector check • Harness check Intermediate transport sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[G]) • Connector check • Harness check Reading end sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Exit sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[E]) • Connector check • Harness check RADF board • Connector check (CN74, CN75) • Board check Drive unit, Rollers • Gear check • Roller check