Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F090 — Toshiba e-Studio 6550c

Code: F090

Description: SRAM abnormality on the SYS board
Causes: SRAM (SYS board)
Remedy: 2. When “SRAM REQUIRES INITIALIZATION” is displayed on the LCD, check the destination and then press the [START] button. If the destination is not correct, key in the correct one and then press the [START] button. 3. After the confirmation message is displayed on the LCD, press the [INTERRUPT] button (to initialize the SRAM). 4. Perform the panel calibration (08-9050). 5. Enter the serial number (08-9601). Be sure that the serial number is the same as that on the identification label attached on the rear cover of the equipment. 6. Initialize the NIC information (08-9083). 7. Turn the power OFF and then start up with the Adjustment mode (05). 8. Perform “Data transfer of characteristic value of scanner” (05-3203). 9. Perform “Automatic gamma adjustment” <PRC> (05- 7869) (using [4] [FAX] test pattern). 10.Perform “Automatic gamma adjustment” <PRT (600dpi)> (05-8008) (using [70] [FAX] test pattern). 11.Perform “Automatic gamma adjustment” <PRT (1200dpi)> (05-8009) (using [230] [FAX] test pattern). 12.Turn the power OFF and then back ON. If the error is not recovered, replace the SRAM on the SYS board.

← Xem tất cả mã lỗi Toshiba e-Studio 6550c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie