Code: E020
Description: Stop jam at the fuser transport sensor: The trailing edge of the paper does not pass the fuser transport sensor after its leading edge has reached this sensor.
Causes: LGC board ADU board PFC board Rollers
Remedy: Fuser transport sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[2]/[C], 03- [COPY]ON/[5]/[F]) • Connector check • Harness check LGC board • Connector check (CN309) • Board check ADU board • Connector check (CN491, CN497) • Board check PFC board • Connector check (CN500, CN511) • Board check Drive unit, Rollers • Gear check • Roller check