Description: Belt escape unit home position error detection: The belt escape unit does not leave the home position when the Knurled belt motor has been driven for specified time. [MJ-1029]
Remedy: Check the Knurled belt home position sensor (PI28). Does the sensor operate normally? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and Knurled belt motor (M13) normal? → NO → Repair the wiring. YES Is there any abnormality in the belt escape mechanism? → NO → Check the assembly and repair the mechanism. YES Does it improve when the Knurled belt motor (M13) is replaced? → NO → Replace the finisher controller PC board. YES End