Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB1 — Toshiba e-Studio 810

Code: CB1

Description: Abnormal feed motor
Remedy: [Procedure 1] Is second feed motor (M8) rotating in reverse at the fixed timing? NO Replace second feed motor or finisher controller PC board. YES Is the shutter securely attached to the shutter upper/lower bars? NO Attach it securely. YES Turn the feed roller-2 in reverse by hand. Do the shutter upper/lower bars move up and down? NO Fix the mechanism including the shutter upper/lower bars and gears of the feed roller-2. YES Is the shutter closed detecting switch (MS4) working normally? NO Replace the switch. YES Replace the finisher controller PC board. [Procedure 2] Is second feed motor (M8) rotating in reverse at the fixed timing? NO Replace second feed motor or finisher controller PC board. YES Is the shutter securely attached to the shutter upper/lower bars? NO Attach it securely. YES Turn feed roller-2 in reverse by hand. Do the shutter upper/lower bars move up and down? NO Fix the mechanism including the shutter upper/lower bars and gears of the feed roller-2. YES Is the shutter open sensor (PI5) working normally? NO Replace the sensor. YES Replace the finisher controller PC board. [Procedure 3] Check the safety zone switch (MS3). Is the switch working normally? NO Replace the switch. YES Is the safety zone switch (MS3) correctly pressed? NO Fix the mechanism. YES Is the shutter closed detecting switch (MS4) working normally? NO Replace the switch. YES Is the shutter closed detecting switch (MS4) correctly pressed? NO Fix the mechanism. YES Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 810

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie