Code: E14
Description: 2nd cassette misfeeding (paper not reaching the 2nd cassette feed sensor)
Remedy: Open the feed cover. Is there any paper in front of the 2nd cassette feed sensor? YES Remove the paper. NO Is the 2nd cassette feed sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[3]/[B]) NO 1. Check if the connector of the 2nd cassette feed sensor is disconnected. 2. Check if the connector J329 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the 2nd cassette feed sensor. 6. Replace the LGC board. YES Is the 2nd cassette feed clutch working? (Perform the output check in the test mode: 03-202) NO 1. Check if the connector of the 2nd cassette feed clutch is disconnected. 2. Check if the connector J329 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are opencircuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the 2nd cassette feed clutch. 6. Replace the LGC board. YES Check the 2nd cassette feed roller and separation roller. Replace them if they are worn out.