Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E54 — Toshiba e-Studio 810

Code: E54

Description: Leading edge of paper not reaching the transport sensor 3
Remedy: Is the transport sensor 3 working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[9]/[C]) 1. Check if the connector of the transport sensor 3 is not disconnected. 2. Check if the connector J334 on the LGC board is not disconnected. 3. Check if the connector pins are not disconnected and the harness is not open-circuited. 4. Check is the conductor pattern on the LGC board is not short- or opencircuited. 5. Replace the transport sensor 3. 6. Replace the LGC board. Check the condition of the roller at the horizontal transport section and clean it, or if it is deteriorated, replace it.

← Xem tất cả mã lỗi Toshiba e-Studio 810

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie