Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi T3 — Riso FR3910

Code: T3

Description: Clamp Error (1)
• In 4 seconds from turning ON of the Clamp solenoid in clamp retrial, the Clamp safety switch is held still pressed down.
• In 4 seconds from turning OFF of the Clamp solenoid, the Clamp safety SW has not been pressed.
• In 8 seconds from turning ON of the Clamp motor in opening direction in clamp retrial, the 180° Angular sensor has not detected magnet.
• In 8 seconds from turning ON of the Clamp motor in closing direction in clamp retrial, the 0° Angular sensor has not detected magnet.
In any of the above cases, master making is performed to the end.

← Xem tất cả mã lỗi Riso FR3910

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie