Code: E 03
Description: Clamp Error 1
Displayed to interrupt the machine operation:
1) If the actuator of the Clamp safety switch is still depressed 4 seconds after the Clamp solenoid was activated (turned on).
2) If the actuator of the Clamp safety switch has not been depressed within 4 sec. after the Clamp solenoid was released (turned off).
3) If the Angular magnet has not been detected by the Angular sensor (either 0° or 180°) within 8 seconds after the Clamp motor started rotating.
4) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.
Displayed to interrupt the machine operation:
1) If the actuator of the Clamp safety switch is still depressed 4 seconds after the Clamp solenoid was activated (turned on).
2) If the actuator of the Clamp safety switch has not been depressed within 4 sec. after the Clamp solenoid was released (turned off).
3) If the Angular magnet has not been detected by the Angular sensor (either 0° or 180°) within 8 seconds after the Clamp motor started rotating.
4) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.